ISO/TS 16949 ISO 9001
Building Quality Products & Solutions since 1957

The Zippertubing Company Website is currently under construction. This website will have limited functionality for the time being.

Case Studies

  • Missile Canard Retention Sleeve
    In Case Studies, Tech Tips
    PROBLEM: A military customer requested an inexpensive solution to retain missile canards in a retracted condition while missiles were in storage crates and attached to Helicopter launch pylons prior ...
  • EMI Shielding as a Dielectric Test Medium
    In Case Studies
    A customer requested a solution that could utilize a reusable EMI Shielding cloth to create a 50,000 volt differential for testing molded-Polyethylene utility pole crane buckets. PROBLEM: A customer ...
  • EMI Shielding of Festoon CablesEMI Shielding of Festoon Cables
    In Case Studies
    A customer requested a solution to an EMI-hardening problem on pre-existing festoon cables. The new easy-to-install EMI Shield jacket supplied to the customer did the job. PROBLEM: A customer ...
  • Sealed Yacht Splice
    In Case Studies
    PROBLEM: A custom yacht manufacture was experiencing corrosion of large-diameter grounding cable splices. The salt-laden environment was corroding the crimped copper splice device and exposed cable ...
  • EMI Shielded “T’s”
    In Case Studies
    ...
  • Shield & Jacketing of Aircraft FLIR Harness
    In Case Studies
    ...
  • VNH-23 Cable Jacket
    In Case Studies
    ...
  • Insuflect® Heat Barrier
    In Case Studies
    ProblemExtreme heat (650°C) is required during the re-burning of particulates in the After Treatment Device (ATD) as required by the recent EPA standards for cleaner vehicle emissions. Additionally, ...
  • Zipper-Mesh® EMI Shielding
    In Case Studies
    ...
  • Protective High Temperature Resistant Jacket
    In Case Studies
    PROBLEM: An industrial machine metalworking customer needed to protect machine power and signal circuitry from hot metal shavings and grinding debris over moderate-length cable runs. Although the ...
  • I.C. Tester Head Shield
    In Case Studies
    ...
  • Printed Circuit Board EMI Shield Pouch
    In Case Studies
    PROBLEM: A U.S. Homeland Security agency required EMI hardening of a classified electronic system and had discovered, after shielding all interconnect cables, that the source of the EMI leakage ...
  • Zipper-Mesh® (PFR) EMI Shielding
    In Case Studies
    ...
  • NSF Cable Splice Cover
    In Case Studies
    ...
  • Space Shuttle Helium Barrier Bag
    In Case Studies
    PROBLEM: Space Shuttle main engine fuel lines required encapsulation with a removable device that could contain gaseous Helium and ensure no build-up of flammable liquid Hydrogen in the compartment. ...
  • A Portable Shielding Enclosure For EMC Testing
    In Case Studies, Engineers Knowledgebase, Press Releases
    Download PDFRead As PDF SHIELDED ROOMS – Faraday Cage A Portable Shielding Enclosure For EMC Testing   Interference Technology Engineers’ Master (ITEM) – 1995 The International ...
  • Airborne Wire & Cable Repair Using 135ºC PRT-ES® Tubing
    In Case Studies
    Download PDFRead As PDF Airborne Wire & Cable Repair Using 135ºC PRT-ES® Tubing By VERNON L. SHRADER Director of Engineering Presented April 20, 2011 2011 Aircraft Airworthiness & Sustainment ...
  • Custom Cable Cover using Z-Wrap ®
    In Case Studies
    Case Study: Custom Cable Cover using Z-Wrap ® Product: Z-Wrap ®, PVL-10 & Adhesive Tape Problem: Electronic board ribbon cables were being chaffed during inspection, installation and removal, so ...
  • Hose, Wire & Cable Management
    In Case Studies
    Case Study: Hose, Wire & Cable Management Product:  VNH-23 Cable Jacket Problem:  Hose, wire, and cable management and protection has always been a big problem at private yacht and ...

Speak to an Engineer Today!

We have highly experienced and friendly engineers on site ready to assist you in all your projects